Fire Behavior and Combustion Unit VII Final Project

For This or a Similar Paper Click Here To Order Now

FIR 2303-19.01.02-4B24-S2, Fire Behavior and Combustion
Unit VII Final Project
Unit VII Final Project
Assignment Content
For this assignment, you will complete an essay based on the scenario-based case study. The essay should be a two-to-three page narrative focusing on arguments that support what the authors discuss in Units IV through VII and the assigned course textbook chapters, as well as other research that you conduct related to these concepts. Each of the concepts discussed need to be applied to the scenario-based case study based on the “Points to Ponder” and “Building on the Scenario” segments presented in the Unit IV-VII Study Guides. Be sure to use APA Style Level Headings as needed to separate and organize your paper into sections (See this Level Headings tutorial for help with level headings).
To review the original case study again please click here to view the scenario. Please click here to access a PDF of the presentation.
The list below may help you in focusing on three or four of for main concepts covered in Units IV through VII:
The plume of a fire burning in the apartment contains three zones. What are the differences between the layers in the zones?
The ventilation pattern can change during a fire. What determines the hot upper layer temperature and optical density during a fire in a compartment with an opening?
With the intense heat in the room, is the cooking oil already evaporating sufficiently to reach the lower flammability limit in the vapor phase over the fuel surface?
Does chemical change occur within solid materials in and around the apartment and within the chemistry of the volatiles during pyrolysis?
Were there any factors that influenced the smoke or fire effluent occurrence of the extreme fire behavior phenomenon?
Did the radiative transfer from the soot, flames, and hot upper layers in the fire room affect the rate at which the fuel burns and the likelihood of ignition? Did this affect fire attack or rescue efforts?
What effect did the smoke obscuration have on fire attack or even rescue efforts?
Is water with added wetting agents more effective than plain water for the extinction of fire in fibrous materials, such as furnishings?
Does the use of firefighting foam, when combined with other tactics, create a more efficient fire attack?
Do wetting agents improve water efficiency, (surface tension reduction) when used on structure fires?
To supplement your discussion and support your conclusions, you should use the course textbook, information from the CSU Online Library and/or from reputable, reliable sources, such as journal articles, case studies, scholarly papers, and other sources that you feel are pertinent. All sources used, including the textbook, must be referenced; paraphrased and quoted material must have accompanying citations following APA Style. You must include at least three sources, including your textbook.

 

Struggling with where to start this assignment? Follow this guide to tackle your assignment easily!

Step 1: Introduction (1 Paragraph)

  • Provide an overview of fire behavior and combustion in compartment fires.
  • Briefly introduce the scenario-based case study and its relevance to Units IV–VII.
  • State the main topics you will analyze (choose three or four from the provided list).

Step 2: Analysis of Key Concepts (3–4 Sections)

Each section should focus on one key concept, using the case study as an example.

  1. Fire Plume and Layering in a Compartment Fire

    • Describe the three zones of a fire plume:
      • Lower layer: fresh air entrainment.
      • Middle zone: combustion and flame propagation.
      • Upper layer: heated gases and smoke accumulation.
    • Explain how this layering affects fire spread and firefighter operations.
  2. Ventilation and Temperature Changes

    • Discuss how the fire’s ventilation pattern influences the hot upper layer temperature and optical density.
    • Explain the role of openings (windows, doors) in controlling oxygen supply and fire growth.
  3. Pyrolysis and Chemical Changes in Combustion

    • Define pyrolysis and how solid materials in the apartment undergo chemical breakdown due to heat exposure.
    • Discuss how volatiles released during pyrolysis contribute to fire intensity and smoke production.
  4. Impact of Smoke on Fire Attack and Rescue Efforts

    • Explain how smoke obscuration reduces visibility, affecting firefighter navigation and victim rescue.
    • Discuss how radiative transfer from soot and flames influences ignition and burning rates.

Step 3: Fire Suppression Techniques (1–2 Paragraphs)

  • Compare water with wetting agents vs. plain water for fire suppression in fibrous materials.
  • Explain how firefighting foams improve fire attack efficiency when combined with other tactics.

Step 4: Conclusion (1 Paragraph)

  • Summarize the key findings from your analysis.
  • Reinforce the importance of understanding fire dynamics for effective firefighting strategies.

Step 5: References

  • Cite at least three sources, including your course textbook.
  • Ensure APA formatting for in-text citations and the reference list.

This structure will ensure a well-organized and detailed response. Let me know if you need additional help! 🚒🔥

For This or a Similar Paper Click Here To Order Now

WRITE MY ESSAY